Home > Shop By Process > Patina > Waxes & Sealers >

Permalac Lacquer (Original) - Flat
Permalac Lacquer (Original) - Flat


 
Permalac is a clear air-dry lacquer that is designed for exterior protection of surfaces of steel, aluminum, copper, silver and bronze at higher temperatures. Permalac contains inhibitors for UV and corrosion protection. It has been found that even a blow torch could not discolor a brass fitting protected by Permalac! In a recent field test, Permalac outperformed 6 other coatings including Syncrylac in protecting steel surfaces. It should give satisfactory exterior protection for at least ten years under normal conditions. Considerably longer life is expected. For brush application, it is ready to use. For spray application thin with #281thinner. Permalac air dries to the touch in less than 5 minutes; may be force dried faster at 250 F. Air dries hard in an hour or so, depending on the film thickness, temperature etc.
The Original Formula can not be sold in CA or HI.
If you are ordering from CA or HI purchase the Permalac EF Formula which works just as good as the Original.


Item# Item Name Our Price Qty Add
808080810-0120 Permalac Lacquer (Original) - Flat - 12 ounce Spray Can
$28.75
808080810-0160 Permalac Lacquer (Original) - Flat - 1 pint
$42.80
808080810-0320 Permalac Lacquer (Original) - Flat - 1 quart
$52.46
808080810-1280 Permalac Lacquer (Original) - Flat - 1 gallon
$140.47
808080810-6400 Permalac Lacquer (Original) - Flat - 5 Gallon Pail
$634.83
Check the items you wish to purchase, then click


Features:
A ready to spray formulation of Permalac in a matte finish. Originally developed as a protective finish for copper, brass and bronze, Permalac has also been used successfully on steel, wood, terracotta and concrete. It is weatherproof, and resistant to both ultraviolet light and salt air atmospheres.
  • A solvent based lacquer that contains inhibitors for Iron & Steel as well as Bronze, Brass, & Copper.
  • Not Recomended for use with Oil Based Size.
  • Approximate coverage upto 350 Square feet per gallon can.
  • A ready to spray formulation of Permalac in an aerosol can. Approximate coverage upto 35 Square feet per 12/16 ounce can.



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop By Process > Patina > Waxes & Sealers
Waxes, Sealers & Lacquer
Waxes, Sealers & Lacquer > Permalac Lacquer
Shop By Process > Patina
Shop By Process > Wood
Shop By Process
Shop By Process > Etching