Share


Use these cards in PayPal, even without a PayPal account.




Join our mailing list!

ArtChemicals.com is certified as a Green Business by the Association of Bay Area Governments (ABAG)
 
You are here: Home > Shop By Process > Etching
Sort By:
Page of 4  
Sulfuric Acid, 66^ Baume, 93%, Technical

Ferric Chloride, Anhydrous, Powder, Purified

Ferric Nitrate, Nonahydrate, Crystal, Technical

Nitric Acid
Nitric Acid, 70%, Technical

Synonyms: Aqua fortis, Spirit of nitre, Salpetre acid, Hydrogen Nitrate
Acetone, Technical

Ferric Chloride, 41^ Baume Solution

Sulfuric Acid, 98%

Permalac Lacquer (Original) - Satin

Permalac is a clear air-dry lacquer that is designed for exterior protection of surfaces of steel, aluminum, copper, silver and bronze at higher temperatures. Permalac contains inhibitors for UV and corrosion protection. It has been found that even a blow torch could not discolor a brass fitting protected by Permalac! In a recent field test, Permalac outperformed 6 other coatings including Syncrylac in protecting steel surfaces. It should give satisfactory exterior protection for at least ten years under normal conditions. Considerably longer life is expected. For brush application, it is ready to use. For spray application thin with Xylenes. Permalac air dries to the touch in less than 5 minutes; may be force dried faster at 250 F. Air dries hard in an hour or so, depending on the film thickness, temperature etc.
Permalac Lacquer (Original) - Flat

Permalac is a clear air-dry lacquer that is designed for exterior protection of surfaces of steel, aluminum, copper, silver and bronze at higher temperatures. Permalac contains inhibitors for UV and corrosion protection. It has been found that even a blow torch could not discolor a brass fitting protected by Permalac! In a recent field test, Permalac outperformed 6 other coatings including Syncrylac in protecting steel surfaces. It should give satisfactory exterior protection for at least ten years under normal conditions. Considerably longer life is expected. For brush application, it is ready to use. For spray application thin with #281thinner. Permalac air dries to the touch in less than 5 minutes; may be force dried faster at 250 F. Air dries hard in an hour or so, depending on the film thickness, temperature etc.
Acrylic Topcoat - Satin

This premium Non-Reactive clear sealer provides protection from abrasion, water and ultra-violet light. Our solvent based Acrylic Top-Coat resists chemicals and may be applied by brush or spray.